How to fix h20 error code on Panasonic front load washing machine

Assalamu Alaikum!
Welcome to this article. Today, on 31 Aug 2023, writing this article, we discussed the Panasonic heater model of the front-loading washing machine that shows an H20 error code.
Today, I will explain why you are facing the h20 error code on the Panasonic front load heater model washing machine, what it actually means, how it can be fixed, and how it can be repaired.
Heater thermistor failure
Check to see whether the heating thermistor sensor is installed in it because it’s possible that the rat chewed through the wire leading to the sensor. If the rat chewed through that wire, you can still solve this problem even if you replace that wire.
Second, you should not inspect the connector and wire of the heater since this mistake may also be caused by a loose connection or a wire that has been accidentally shorted. Once you make sure this, as well as if you patch the wire, this error will be fixed if you do both of these factors.
After that, you may also supply the heater and switch it on; however, if your heater does not heat, you will need to change the heater. If the wiring of the heater has not been cut by the rat, and if the heater is actually in good condition, then you must determine whether or not the power circuit board is delivering electricity to the heater.
If the PCB is not supplying power, then you will need to replace the power circuit board. If the PCB is providing power to the heater, then you will need to replace the heater. If the PCB is not providing power to the heater, then you will need to replace the PCB. After changing the PCB, this error will be eliminated entirely. I have explained all three solutions to you; if you check each of these three solutions carefully, you should be able to resolve the issue with your washing machine.
Hope you have understood the information given by me,
Disclaimer: I am Abdullah write this article based on my experience. Abdullah is not responsible for her complete honesty. For any problems, damages, or detailed information, the user must contact the customer service center of the respective company.